Addcare Biotech Co., Ltd.

Yantai,  Shandong 
China
http://en.addcare.cn/
  • Booth: 3669

Booth Profile

Addcare Bio-Tech Co., Ltd. is a high-tech enterprise engaged in design liquid handling based processing systems, including fully automated immunoassay workstation ELISA/CLIA/FIA, liquid handling system, DNA/RNA extraction and PCR setup systems, Gelcard blood grouping system, Vacuum Tube labeling system and etc. Addcare is certified according to ISO9001-2008, ISO13485-2003. The products are CE certified and hold FDA registration. Will show automated POCT CLIA analyzer in AACC.


 Press Releases

  • General

    Test Menu

    Fully automated Blood grouping system

    page2image3632page2image3792

    Blood grouping/ reverse grouping/ phenotyping/ crossmatching/ antibody screening/ antibody identification/ direct AHG test(DAT)/ single antigens/Rh(D) Rh(CcEe)/Newborn-ABO-Rh/ Rh/k/ ABO DD/Kell/ AHG Polyspecific/ ADK

    page2image5448page2image5608

    Typical

    page2image6216

    throughput Transfer

    arm/gripper Pipetting channels

    up to 96 cards/ hour

    page2image8208

    1 (transfer card)

    page2image8896page2image9056

    2 (800ul disposable plastic tips, non conductive, low cost, Liquid level, clot, empty tube detection)

    page2image10328page2image10488

    Piercing module

    12 cards position

    page2image11664page2image11824

    Tips rack capacity

    384 tips (4 positions, each can hold 96tips)

    page2image13240page2image13400

    Pipetting range

    Range: 10 to 800ul/ Increment: 1ul

    page2image14696page2image14856

    Sample tube

    capacitySample types

    24 X 6 = 144 samples (standard tube diameter 13mm, other diameters on

    page2image17064page2image17224

    request)
    centrifuged whole blood/ packed red blood cells/ 3-5% and 0.8% red cell

    suspensions/serum or plasma

    page2image18752page2image18912

    Reagent module

    2 X6=12 blending diluent position+96 deepwell dilution microplate+2 dilution position+2control

    page2image20472page2image20632

    Incubation module

    12X2=24 cards position (RT- 50°C adjustable at an increment of 0.1°C )

    page2image22168page2image22328

    Centrifuge

    12X2=24 cards position (maximum speed 3000r/min, Centrifugal time, speed adjustable programming)

    page2image23888page2image24048

    Gel card box

    Reader

    24X4=96 card capacity

    page2image25712page2image25872

    Barcode scanner

    2 (1 for sample and reagent, 1 for gel card)

    page2image27328page2image27488

    High resolution image acquisition interpretation system, automatic interpretation of acquisition and recognition results.The background of back light system, original image is clear and permanent, easy to query and tracking.

    page2image29424page2image29584

    Software

    Completely intellectual property rights, humanization design, Wizard-style user interface, easy to use

    page2image31080

    Bi-directional LIS/HIS connection, evaluate and send results

    page2image31928

    Software interface synchronous operation, synchronous refresh, visual display running

    state
    Operating process real-time monitoring, early warning function with abnormal situation

    page2image33808page2image33968

    Perfect function of experiment process tracking function of full trace ability tracking analysis and quality control.

    page2image35280

    Powerful memory storage support testing result recheck include original picture, sample nubber, reagent message,reading result,operator,testing time,test protocol, test method and etc.

    page2image36792page2image36952

    Certification

    ISO 13485:2003 ISO9001:2008

    Addcare Bio-Tech is special focus on design fully automated liquid handling platforms & assay processing systems more than 12 years in China, including fully automated ELISA /CLIA/FIA workstation,robotic immunoassay processor ,blood grouping system ,DNA extraction, Vacuum Tube labeling system and etc.
    We have Intellectual Property Rights unique in China which can ODM for you according to special required.
    Our products are CE &FDA marked.Addcare is certified according to ISO 9001 and ISO 13485.
  • Fully Automated POCT CLIA Analyzer (TS60A/ TS120A)


    ODM Welcome      tailored to your cartridge reagent need

    Highest accuracy and precision

    Convincing performance

    Compact benchtop design

    Intuitive 10” touchscreen operation

    6/12 samples in paralleI within 17 minutes

    From whole blood serum or plasma

    Highest accuracy and precision fully automated chemiluminescence point-of-care testing system. 

    Whole blood detection, one touch screen, easy to operate, no need centrifuge and samples delivery, reduce testing time. 

    6 or12 parallel pipetting channels, 6 or 12 quantitative analysis simultaneously, samples and items can be combined randomly. 

    All reagents, buffer solutions and washing solutions are insert the reagent cartridge, water connection or drain is not necessary. 

    Computer and printer are integrated, operation via touchscreen monitor. 

    TS60A provides you with  the same speed whether it is multiple parameter detection of the same sample or different parameter detection for different samples.

    This unique speed brings rapid, convenient and flexible diagnostic methods to the clinic testing. 

    TS60A or TS120A is the best choice for hospitals, medical office and emergency labs.

    Application: 

    Compact and optimized mobility design, fully automated transfer the samples for pipetting, which can directly use whole blood testing. Applied wherever fast quantitative results with full-scale lab quality provide decisive diagnostic advantages, more flexible and suitable for the emergency testing. TS60A is also an ideal supplement for major analysis systems in the central labs.It can be tested in small quantities or in batches at any time without interfering with the processes of routine analysis.

  • Rodeman

    Intelligent test tube collection management system

    Intelligent sellection and recognized the tubes

    Automated barcodes printing & sticking

    Visualization 10.1’’ LCD touch screen

    Automated to process after one-touch operation

    Blood collection tube & special testing liquid

    Connected calling & queuing system and LIS / HIS system

    Benchtop design, compact  and easy to use

  • Product List

    Distributors and OEM Welcome!

    IPR unique in China – Solution portfolio unique in World – Assembly line automated immunoassay workstation

    Addcare AIW line | Fully automated immunoassay workstation | ELISA | CLIA | FIA series

    page1image4216page1image4384page1image4544

    Number of Tube Reagent Plate Incubation Washing Dimensions W*L*H Weight channels carriers carriers carriers positions channels mm kg

    page1image6096

    ADC ELISASSIST ONE
    ADC ELISACLIA/FIA 400 4 192 32 9 9 96

    Addcare CLIA line | High throughput Fully automated immunoassay workstation

    1 96 28 1 1 8 645x450x680 301500x810x1735 340

    ADC ELISA/CLIA/FIA 200 2 144 24 4 4 16 1270x785x1000 180

     

    ADC ELISA/CLIA /FIA600 8 240 40 16 16 96 1940x900x1735 450

    page1image13192

    Reaction Pipette Sample Reading Measuring PMT Dimensions W*L*H Weight channels channels position precision time(min) mm kg

    page1image14664

    POCT CLIA TS60A 6 1 6 2%

    AE CLIA iTube 3000 120 16*3 60+30 48*5

    Addcare Test tube collection management system

    page1image18776

    POCT CLIA TS120A 12 1 12 2% 19 1 570X600X600 55

    page1image19944page1image20264

    Sample Reagent Reaction Reaction Sample Reagent position position position cup probe probe

    Washing postion PMT

    page1image22648page1image22808

    Throughput Position Printer

    Barcode Barcode Test tube Dimensions Weight size quantity size W*L*H mm kg

    page1image24552

    ADC RODEMAN

    Blood Grouping System AISEN90

    Blood Grouping System AISEN170

    page1image26792page1image26952

    Throughput Transfer Pipetting Piercer Incubation Centrifuge Barcode scanner Reader arm channel positions

    page1image30056

    Addcare ASP line | Liquid handling systems

    ADC ASP 1/75 1 120 12 4 - - 645x450x680 28 ADC ASP 4/100 4 144 24 8 - - 1385x810x1050 190

    page1image32104page1image32264

    ADC ASP 2/100 2 144 24 8 - - 1385x810x1050 180

    page1image33432page1image33752

    ADC ASP 8/150 8 144 24 12 - - 1785x810x1050 280

    page1image34920page1image35240

    DNA extraction series 2/4 DNA extraction & PCR preparation systems | OEM & Custom Development

    page1image36568page1image36888

    YANTAI ADDCARE BIO-TECH LIMITED COMPANY

    Address:7 Hanjiang Road, Development Zone, Yantai City 264006, Shandong Province, China International Department Tel : +86 535-6398536 Fax:+86 535 6398506

    E-mail:info@addcare.cn Website :en.addcare.cn

    Addcare Product List 20180226page2image1088

    OEM Solutions
    Match your assay and process automated application

    Automated Immunoassay Workstations ELISA/CLIA/FIA
    DNA extraction & PCR preparation systems
    Automated Gelcard Blood grouping system ADC AISEN 90/170 Intelligent Test tube collection management system

    High speed and throughput Convincing Performance Benchtop and cabinet design Flexible workbench setup Intuitive and flexible software Cost-effective

    Sample Pipetting

    Air displacement technology and disposable tips Real time tip monitoring/Liquid handling process monitorLiquid level monitoring/Clot monitoring/Tube volume monitoring Dynamic Pipetting Channel Positioning System Dispensing Modes of Aspirating Samples

    page2image8400

    COMPONENTS

    Barcode Reader

    INSTRUMENTS

    Gelcard Incubator R-24C

    Tube labeling system Rodeman

    Intelligent Sample Pipetting

    Gelcard Centrifuge NG-12

    POCT CLIA TS60A

    Plate Shaker - Incubator

    ELISA Microplate Reader iRead A8

    Auto blood grouping system AISEN90

    96-well Washer

    ELISA Microplate Reader iWash 8/12

    ELISA 200

    Magnetic particle /POCT

    CLIA Microplate Luminometor Jude 96

    AE CLIA iTube 3000

    page2image16152page2image16320page2image16488page2image16656page2image16824page2image16992page2image17160page2image17328page2image17496page2image17664page2image17832page2image18000page2image18168page2image18336page2image18504page2image18672

    1

  • High speed and throughput Convincing performance Benchtop and cabinet design Flexible workbench setupIntuitive and flexible software Cost-effective

    Microplate Washing

    Addcare‘s range of immunoassay workstations combine all functions required to process microplate based immunoassays on an efficient, convenient and fast platform. Sample- and reagent transfer are per- formed by the high precision pipetting system. An array of shaker-in- cubators carry the microplates, assure accurate reaction temperature and efficient mixing. A high performance 96-well microplate washer module provides fast and efficient washing. The measurement mo- dule selected to match your specific assay technology ELISA, CLIA or FIA, provides reliable raw data to be evaluated and the plate transfer arm moves the plate between the modules used for each individual processing step.

    The system is complemented by ADCstation, a powerful PC-software providing an intuitive user interface to control all system functions, define and execute the desired processes, perform evaluation and provide access to results and process data.

    page2image69552page2image69712page2image69872page2image70032page2image70192page2image70352page2image70512page2image70672page2image70832page2image70992

    Standard Configurations addcare AIW

    page2image85656

    All addcare AIW immunoassay workstations are available configured for ELISA, CLIA and FIA. The table below refers to the different types of ELISA workstations. For alternative measurement technologies replace ELISA in the list of models below by CLIA or FIA.

    page2image87928

    Model
    Design
    Pipetting channels

    Worktable size WxD mm

    Tube carriers (samples)

    Plate carriers

    Microplate washer Tip racks
    Tip eject station

    Addcare offers a full range of sample preparation and assay processing systems, based on a selection of workbench platforms, a number of

    ADC ELISA 200

    benchtop

    2

    1085 x 580

    6 (144 tubes)

    ADC ELISA 300

    cabinet

    2

    1315 x 730

    8 (192 tubes)

    ADC ELISA 400

    cabinet

    4

    1315 x 730

    8 (192 tubes)

    ADC ELISA 600

    cabinet

    8

    1675 x 820

    10 (240 tubes)

    ADC ELISA 1100

    dual cabinet

    8 in front cabinet + 4 in rear cabinet

    3170 x 820

    10 (240 tubes)

    16 in front cabinet 16 in rear cabinet (shaker incubators)

    3 x 96-well washers

    1 in front cabinet + 1 in rear cabinet

    1 in front cabinet + 1 in rear cabinet

    page2image104536page2image104696page2image104856page2image105016page2image105776page2image105936page2image106864page2image107024page2image107184page2image108112page2image108272page2image109200

    Each standard sample tube carrier can hold up to 24 tubes with a diameter of 12mm

    page2image111176page2image111336

    4
    shaker incubators
    + 1 ambient (optional)

    8-well washer 16-well (optional)

    9
    shaker incubators

    96-well washer

    9
    shaker incubators

    96-well washer

    16
    shaker incubators

    96-well washer

    page2image116136page2image116296page2image116456page2image117384page2image117544page2image117704page2image117864

    1 tip rack holding up to 4 sets of 96 tips (up to 384 tips in total)

    1 with a waste container installed below the worktable

    page2image120456page2image120616page2image121544page2image121704page2image122128

    ADC ELISA 200 | ADC ELISA 300 | ADC ELISA 400 | ADC ELISA 600 | ADC ELISA

    Addcare sample preparation, assay processing systems and individual solution

    1100 | ADC CLIA 200 | ADC CLIA 300 | ADC CLIA 400 | ADC CLIA 600 | ADC CLIA

    1100|ADCIFA200|ADCIFA300|ADCIFA400|ADCIFA600|ADCIFA1100

    functional modules common across our portfolio and application specific measurement or processing modules. Take a look at the complete

    Addcare portfolio to select the system best suited for your requirements or discuss your specific needs with your Addcare sales partner to have your individual system configured.

    Sample Pipetting

    Air displacement technology and disposable tips

    The pipetting modules in Addcare's assay processors utilize drip- proof air displacement pipetting with disposable tips. This technolo- gy eliminates any risk of cross contamination by carryover and pre- vents sample dilution with system liquid, both common in washable tip systems. Different sizes of disposable tips can be used to match the specific pipetting requirements.

    Real time tip monitoring

    During tip-loading, pipetting and tip-ejection the system conti- nuously monitors the presence and proper fixing of each tip. In case of a problem the software will automatically set necessary actions, like retry loading the tips to assure continuous operation or display the related warning and ask for user intervention if necessary.

    Liquid handling process monitor

    During aspiration the pipetting system automatically monitors three parameters vital for accurate pipetting and reliable assay processing. If a problem is identified the system provides an alarm and the ope- rator can eliminate the reason immediately.

    Liquid level monitoring is used to detect the surface of the liquid to be pipetted, to assure identical conditions for aspiration and accurate pipetting across all channels. The pressure based detection system allows for the use of standard pipetting tips.

    Clot monitoring, based on sophistica-
    ted analysis of the pressure profile for
    each individual channel during aspirati-
    on, is used to detect clogged tips.

    Tube volume monitoring uses the
    detected liquid level, the sample- or
    reagent-container geometry- and its
    position data to calculate the liquid
    volume available in the related vessel. If
    the available volume is not sufficient to continue the scheduled pro- cess, the system will provide a warning and ask for user intervention. All 8-, 4- and 2-channel systems provide the possibility to deactivate faulty channels if necessary. The system can then still be operated and continue the protocol with the remaining, intact channels until the problem can be eliminated. This feature prevents critical down time of the system while your lab is busy and gives you the chance to plan maintenance when appropriate.


 Additional Info

Included in the Export Interest Directory?
Yes
Business Needs:
Direct Sales
Products to be exported:
Fully automated ELISA workstations,Liquid handling systems, Fully automated Blood Grouping Systems